0:00
Here I have Alcatel Fire E and let me show you how to insert microSD and microSIM card
0:10
in this device. At first, hold down the power key for a few seconds
0:15
When the following menu appears, choose power off and wait until your device is completely
0:20
switched off. Afterwards, you have to find the slots at the left edge of your phone and prepare some
0:28
tiny tool. It could be a thumber tuck or some special eject tool from Alcatel
0:35
Let's use this tool to press this little hole and to open your slots
0:42
Let me show you. You have to push into this little hole
0:53
Excellent, now you have access to your slots. Let's prepare two cards, one microSD and one microSIM card
1:05
Let's start with microSD card. You have to use the first slot
1:10
You have to put your card that way with the characteristic edge right here
1:16
Push this card in the first slot. Push it a little bit harder
1:22
Make sure that your card suits to this slot. Then use some microSIM card and put it in that way
1:33
Excellent, now you have two cards ready to install. Let's insert back the whole slot
1:45
Make sure it's closed and switch on your device to check if both cards are working properly
1:53
Alcatel is turning on. Well done, let's unlock the screen
2:26
You can see at the top of the screen that the phone is connected to one of the mobile
2:30
network so our SIM card is working perfectly. Now let's find and select settings, scroll down and choose media storage
2:49
As you can see the phone detects SD card storage so our microSD card was installed properly
2:56
Excellent, thank you for watching, please subscribe our channel and leave thumbs up
