0:00
Welcome. In front of me is a realme C33 and today I'll show you how you can
0:06
apply a tempered glass to your device. Now you can probably already see that I'm using a glass that is designed for
0:17
a different phone but because this is running, having a display that is
0:22
basically like universal, it's like six and a half inches, this one fits here
0:29
no problem. I'll just kind of dry fit it just so you can see. There we go
0:37
As you can see it's basically perfect here. So that's what I will be using now
0:42
It doesn't really matter. The application process is almost the same. The only
0:49
place where it might differ is when you have a camera. Some of the tempered
0:54
glasses might have like a cutout or hole punch in it. Depending on which one you
0:58
have you'll just want to align it with the camera right here and just kind of
1:03
showcase how I apply my tempered glass. So I would just once I peel this off I
1:08
would hold it by the bezels obviously and then at an angle I would start off
1:12
from the top making sure that the camera is aligned at the end of the top right
1:16
and a left side is also not like too much too crooked or anything like that
1:23
And also while pinching the display I would start to pinch that device and
1:29
this would allow me to evenly position it so there is same amount of like gap
1:35
on right and a left side and then with the same logic I'll lower it down on the
1:40
bottom side. I try to preserve the same kind of spacing and then just simply
1:45
drop it on the display which should in theory then drop perfectly. I mean in
1:51
practice too I have done this multiple times so yeah. Anyway now apart from the
1:56
tempered glass that you get you should also have some probably foam so you can
2:01
throw that out and you should also have wet and dry wipe. If you do if you have a
2:06
microfiber cloth throw this in the trash. These are absolutely pitiful. If
2:11
you don't have an option I guess you can use them. Now when it comes down to
2:15
cleaning your display you can do it obviously with the wet and dry wipe
2:19
which is kind of labeled one and two right so just use it like it's supposed
2:25
to be but if you have a microfiber cloth you can ignore the one and two and just completely wipe it off from any kind of dirt
2:32
Now once you have the display nice and clean next thing you want to worry about
2:50
is the dust that might settle on the display. Okay so once it's clean you want
3:04
to basically jump straight into applying the tempered glass just because dust
3:09
might settle and obviously if you have dust settle on your display it could
3:15
create an air bubble. So there we go. I'm gonna jump straight to it peel that off
3:23
I'm gonna apply it the way I told you and there we go. It's a little bit more of a bezel on the left than the right
3:40
side I could probably...no nevermind Didn't really work. I guess a little bit better. So anyway it's on here though it's
4:02
not sticking just yet so I'm gonna apply some pressure on the display and as you
4:07
can see now it's sticking. So if it won't cover the entire display you can just you
4:19
know use your finger to do so. There we go. And that's it
4:38
So there we go. So if you found this video helpful don't forget to hit like
4:42
subscribe and thanks for watching
