0:00
We are glad to welcome you on a hard reset YouTube channel and today I will show how you can mount a camera on your DGI RSC2 Gimble
0:14
So to start in the box that the gimbal came in you should get those two plates
0:26
So first select what plate you would like to use, the higher one or
0:29
the lower one. The difference is that, well, different cameras are mounted differently, have
0:36
different proportions, different lenses have different proportions. So sometimes it's better to use
0:42
the higher stand or plate so that the camera will not scratch the gimbal and everything will move freely
0:50
and nothing will get in the way. So that's up to you to decide what plate fits your particular
0:58
camera the most but I'll go with the smaller ones since my camera is pretty small and I
1:05
don't even have the lens mounted so yeah no difference at the bottom of your camera you should
1:11
have such hole that's the that's where you screw this plate in
1:15
Did I show you? So here's the hole, here's the plate. The plate itself as you can see it
1:21
not only it has the screw it has this handle that you can well not pick up
1:28
but rather I'll just open like that. And now you can screw the screw without moving the compartment itself
1:38
So now just put it here using this handle screw it into a camera And then adjust the plate itself because if you roll or
1:53
just move the plate around the screw should not be affected so align it well I'm not
1:59
sure whether I've actually screwed it right the whether the orientation is right
2:05
so I'll check that later now once this step is out of the way you can take
2:11
or you should take this plate that also should have came in your packaging in the box that the
2:19
gimbal itself came in and now you've got to mount the camera here like so or you can do it in the
2:25
reverse order and first put this plate onto the gimbal and then put the camera on top
2:30
For me it doesn't make a lot of difference so just see yourself which way you would like to put it
2:37
I will probably just put the camera on this plate first so
2:41
Now here, that's how you put it. Slide it in like that
2:51
And now the camera is fixed it, it will not fall from this plate
2:55
If you would like to take it out of this plate, just press this button here and take it out
3:01
Alright, now let's slide it back. If I'm not mistaken, that's how you do that
3:07
You face the lens, hence to you like that, but I'll check that later
3:15
Anyway, now if you do not want for your camera to move
3:20
lock this lever here to the locked position. And once you do that the camera will be stationary and it will not be moving around Now we can start mounting the plate with the camera So find this part of your gimbal
3:40
Let me show it to you better. So this plate on the gimbal that actually is designed to accommodate the camera
3:48
Before I actually start mounting, I will lock it in as well
3:53
That's the lever that I should use. on the side rather than at the front, now it will be stationary so I can properly mount the camera and it will not go
4:04
So now put the camera like that, just slide it in, it should fit right into its respective, well, designed, engineered space
4:16
Just do that, be careful, take your time, do not rush. do everything, I mean, not afraid to do things as long as they feel natural
4:30
So here did I mess the orientation up? I don't think I did actually, but let me quickly unlock the motor, motor
4:41
So I can see if I poop that way perhaps. Not... I cannot do that
4:51
I can not do that. It's fine. Well, yeah, I gotta slide to this plate away from this motor since the..
5:01
Well, you don't see it. So I gotta slide this plate away from this motor, since when I try to mount the camera, it just interfere
5:11
So yeah I gotta separate those things a little just to give me some wiggle room here Yep so now it should do Let put the plate
5:36
We've managed to slide it in. Now it is mounted successfully, as you can clearly see
5:44
And the logic is the same. with the camera plate, this one, so now you can slide it inwards, outwards, I mean, front and back
5:52
And it will not fall apart in it. You'd like to take this plate or, I mean, take the camera, unmounted
5:58
Find the same button that will unlock it. This will be a second here
6:04
This one, I'll just... Now, the shooting angle is pretty bad
6:23
So the button that you need to press in order to take the plate out is here
6:28
So push it in and take the camera out just like that
6:33
Simple and simple and simple. I guess as far as the camera mounting part goes, that will be it
6:42
The camera has been mounted successfully. So that will be it for this video
6:54
Thanks for watching. Thanks for your attention and bye-bye
