0:00
Here I have Evolvoa Strongphone Q6 and let me show you how to insert microSD and microSIM
0:10
card on the following phone. At the very beginning hold down the power key for a few seconds, then tap power off
0:16
and continue the operation by tapping OK. Wait until your phone is completely switched off and afterwards you have to prepare some
0:25
tiny tool. It could be a special eject tool or some thumber tack
0:31
Then open the protection at the right edge of your phone and simply press into the little
0:40
hole right here to open the tray with your slot. Now you can remove the tray. Excellent
0:53
This is the place when you should input your microSIM card. Here I have one of the following card with the characteristic edge right here and simply
1:02
put this card in that position. Make sure it suits to your device and then let's insert the whole tray into your phone
1:13
Let's do it carefully and let's push it to the end. Excellent
1:20
Now you can close the protection and let's open another slot. You have to use your eject tool one more time
1:30
Let's do it and simply press right here. Excellent. Now you can remove tray from your phone
1:41
This is the place when you can input your memory card. In that case it's of course microSD card with the characteristic edge right here
1:49
Simply put this card in that position and let's insert the whole thing into your phone
1:58
You can close the protection and let me switch on my device to check if both cards are working properly
2:08
The evil bell is turning on. Excellent. Let's unlock the screen
2:21
As you can see the device is reading our SD card so our SIM card is working properly
2:32
And let's go to settings, scroll down and tap storage. As you can see the device is reading our SD card so everything went well
2:43
Thank you for watching. Please subscribe our channel and leave thumbs up under the video
