0:00
Here I have Huawei P9 Plus and let me show you how to insert here nano SIM and micro
0:09
SD card. So at the very beginning let me start by holding a power key, keep holding power
0:16
Let's choose power off and touch power off again just to confirm the whole operation
0:22
Wait until your device will be completely switched off and afterwards you have to find
0:26
a tray for your slots. It should be located at the left edge of the device right here
0:33
And let's just simply remove this thing by using some thumb attack or special eject tool
0:40
So here I have such a tool and let me just press into this hole
0:49
Now you can remove the whole thing from your device and as you can see here you can insert
0:53
micro SD and nano SIM card. Let's start by using micro SD, here I have my card with the characteristic edge right
1:00
here and let's put this card in that position. Now let's insert nano SIM card with the characteristic edge right here and let's put this card as
1:10
simple as that. Excellent now let's push the whole tray into your device
1:19
Let's do it that way. Let's press it to the end
1:30
Now let me switch on the device by holding a power key
1:36
The Huawei P9 Plus is turning on. Wait a couple of seconds
1:47
Excellent let's unmould the screen and let me check if both cards are working properly
1:51
Let's find and select the settings. Let's scroll down and let me find the advanced settings
2:04
Choose storage, memory and storage. And as you can see the device is reading our SD card
2:10
You may also observe that the device is connected to a mobile network so it means that both
2:14
cards are working properly. Thank you for watching, please subscribe our channel and leave thumbs up under the video
