0:00
Here I have Go Cover Quantum 60 Zero and let me show you how to insert here SIM and SD card
0:11
So at the very beginning let's hold down power key for a few seconds
0:15
Let's choose power off and tap OK to confirm it. Wait until your device is completely switched off and afterwards let's remove the back cover
0:24
Let's do it by using the cavity at the down edge of the phone right here and simply use
0:28
your nail finger to open the whole item. Let's do it step by step from the bottom of the device to the top and now you have access
0:35
to your slots. As you may see right here you can insert here two SIM cards and one SD card
0:41
So let's start with SD card. Here I have my memory card with the characteristic edge right here and simply put this card in
0:48
that direction right here. Let me push it to the end, make sure it's sealed to your device and then let me put
0:58
here the SIM card, the regular one with the characteristic edge right here and let's put
1:04
this card in that direction. Excellent! Make sure that you have properly installed cards and then put back the back cover and
1:19
all you have to do is simply use your power key in order to switch on your device
1:24
Let me do it. Keep holding power. The GoClever Quantum 60 Zero is turning on
1:44
Let's unlock the screen. Apps icon. Final select settings
1:54
You can choose SIM card management right here and as you may observe the phone is reading
1:59
our SD card so it's a good sign. Let's go back and choose storage and you may see that the phone is reading our SD card
2:08
so everything went well. Both cards are working properly. Thank you for watching
2:12
Please subscribe our channel and leave thumbs up under the video