0:00
Let me show you how to insert here micro sim and micro sd card
0:11
So at the very beginning let's hold down power key for a few seconds. Keep holding power button
0:16
From the following list let's choose power off and tap ok to confirm it
0:21
Wait until your device is completely switched off and afterwards you have to go to your
0:25
back panel so let me do it. Let's open debug cover protection
0:29
In order to do it you have to use the cavity in that corner of the screen of the phone
0:34
so simply use your naily finger to open the whole item. Let's do it step by step from the bottom of your device to the top and now you have access
0:43
to your battery and to your slots. At first you have to remove your battery by using the following cavity right here at the
0:50
down edge of the phone. Let's simply use your naily finger one more time and now you have access to your slots
0:57
As you can see here you can insert two micro sim cards right here and one memory card in
1:03
that case it's micro sd. So let me start with micro sd
1:08
Here I have my micro sd card with the characteristic right here
1:12
Simply put this card into this slot right here. Let's press it to the end
1:19
Let me show you one more time. So you have to simply put this card in that position and press it to the end. Excellent
1:30
Now let's insert micro sim card. Here I have my micro sim card with the characteristic right here and let's put this card into the
1:38
middle slot right here in that position. Let's push it to the end and let me leave this second micro sim slot empty
1:51
Let me just use my one micro sim card. Then you have to put back the back cover and the battery
1:59
So let me insert the battery at first. Now let's close the back cover protection and all you have to do right now is use your
2:09
power key right here and check if everything is alright. If our card works properly
2:17
So let's hold down power. When a Q-Smart logo pops up release power and wait until your device will be completely
2:23
switched on. Excellent. Now you can unlock the screen right here
2:33
Let's tap apps icon. Let me find and select settings. So settings
2:43
Let's choose sim cards and as you can see the device is reading our sim card so it's
2:49
a good sign. Let's go back. Let's scroll down to device tab and choose storage and as you may observe the device
2:57
is also reading our SD card. So everything went well. Both cards are working perfectly
3:02
Thank you for watching. Please subscribe our channel and leave thumbs up under the video