0:00
Here I have Motorola Moto Z2 Play and let me show you how to insert here the nano SIM
0:10
and microSD card. So at the very beginning let's start by pressing the power key, choose power off and wait until
0:17
your device will be completely switched off. Afterwards you need to find the slot
0:22
The slot is located right here at the top of the device. Let's use some thumb bertaggle special eject tool to open this tray, this slot, this tray
0:31
Here I have such a tool, let me just press it right here
0:36
Now you can remove the whole thing so let me do it. Let's remove the tray for this slot and here you can insert the microSD
0:44
So let's start with the microSD. Here I have such a card with the characteristic edge right here
0:50
Let's put this card in that position. Now here at the back of this tray you can insert two SIM cards
0:58
So let me insert two nano SIM card. Here I have such a card with the characteristic edge right here
1:03
Let's put this card in that position. Now let's insert the second SIM card with the characteristic edge right here and let's
1:13
put it right here. Excellent so now you can insert the whole thing into your device
1:21
So let me do it. Let's insert it right here, press it to the end
1:27
Now let me press the power key to switch on the device
1:33
The Motorola Moto Z2 is turning on
1:42
And that's it. Now let me just check if my device is working properly
1:46
If you have a pin on your SIM card let's insert the pin
1:52
Now let's find and select the settings and here you need to find the SIM card
1:58
As you can see the device is reading our two SIM cards so it's a good sign
2:02
Let's go back. You may also choose storage under device tab. And as you can see the device is reading our microSD card
2:11
So it basically means that everything looks great. So you just accomplished the inserting SIM and microSD on the following device
2:21
Thank you for watching. Please subscribe our channel and leave thumbs up under the video