0:07
And for now I'm using a Woolly Fox Spark Plus and today I will show you how to insert SIM
0:12
and SD card. So starting off we will need to power off the device
0:17
Hold the power key and select power off. Wait for it to shut off
0:23
And in the process we can actually pull off the cover so we can turn around the phone
0:28
and basically where you have the port it's the easiest way to pull it off
0:33
So where you plug in it, plug it in to charge, you can put your fingernail and just start
0:37
pulling on the cover. Go all around to basically so the cover comes off clearly
0:46
Like so. And then you can push up the battery and out like so
0:54
And from here I have the SIM card so mind you. This is the smallest size and it's not this one
1:00
You need to have like the basically metal size. I think it's micro as you can see
1:08
So I have basically an adapter here. I'm going to squeeze it in here. Ok
1:13
As you can see now it's in there and now it can fit here
1:22
That's basically how you want to put it in. And same thing goes for the other one
1:27
You can put it either here in the SIM 1 or SIM 2 it doesn't really matter
1:30
Or you can fill both of them up with SIM cards. And then the memory card itself as you can see right here
1:35
I have to hold it as I am right now with the little edge here on the right side and just
1:43
slide it in as you can see. And you also have like a little image right here to show you how it's supposed to be put
1:48
in for each SIM card and SD card. And once it's in there you can put the battery back in
1:55
You don't need to worry. Make sure that you align these pins where basically where you have the SD card
2:05
So battery should be laying flush. But don't worry it will not go in any other way
2:13
And then you can close the case. Make sure that it's closed all around
2:19
And you can power on the device. Ok, as you can see now the device is on
2:35
And because the SIM card has a pin I need to put it in to unlock it
2:38
So let me do that. And also as you can see SanDisk SD card it's also being read, detected
2:51
So as you can see both of them are working fine. So that's how you insert a SIM card and SD card
2:57
Now if you found this video helpful don't forget to hit like, subscribe and thanks for watching
