0:00
Here I have Coolpad Porto and let me show you how to enter and insert here the SIM and
0:09
microSD card. So at the very beginning let's start by pressing the power key to switch off the device, choose
0:14
power off and wait until your phone will be completely switched off
0:18
Afterwards you need to find the tray, the tray is located at the left edge of the device
0:23
right here and you need to use some thumber tag or the special eject tool, in my case
0:29
let me show you how to do it by using the simple thumber tag
0:33
Let's just press it into this hole right here to open the whole tray
0:38
Now you can remove the whole tray from your device and here you can insert the microSIM
0:46
and microSD card. So let's start by using the microSD. Here I have such a card with the characteristic edge right here
0:55
Let's put this card in that position. Let's insert also the microSIM, here I have such a card with the characteristic edge right here
1:05
Put this card right here. Let me do it again, sorry. Let's put it right here and now you are ready to insert the whole tray into your device
1:18
so let me do it. Let's push it to the end and now press power key to switch on the device and let me make
1:34
sure that both cards works properly. As you can see the coolpad is switching on
1:46
Excellent let's unlock the screen. Let me find and select the settings
1:50
Here I have settings. So let's scroll down and let's find and select storage
2:01
Scroll down and as you can see the device is reading our SD card so it means that our
2:05
microSD was installed properly. You may also see right here that the device connected to one of the mobile network so
2:11
it means that the microSIM is also working just fine. Thank you for watching, please subscribe our channel, leave thumbs up under the video
