0:00
Welcome and for now I'm gonna say YoloPhone Armor 3W and today I'll show you how to go
0:11
through the setup process of this phone. So when you boot it up for the first time, you will be presented with the aptly named
0:18
Hi There screen. So from here, let's just simply select our language, which you can find from the list
0:24
although I'm gonna stick with English. And from there, you wanna tap on Start
0:29
From here you will have the option to insert your SIM card to connect to a mobile network
0:36
But there is a little caveat to it. You will need this screwdriver. It comes with the device in a box, so you can find it in one of those little boxes there
0:42
That will be needed so you can actually remove the plate right here where you will insert
0:49
your SIM card or SD card, whichever one you want. So anyway, we're not gonna be doing that right now, obviously
0:56
So I'm gonna select Skip. The moment you insert your SIM card, it will work just fine, so there is no need to worry
1:01
about it. Then I have Connect to Wi-Fi. Again, you can skip this if you don't have any kind of accessible Wi-Fi near you, which
1:07
I'll need to do is tap here, D. And if you skip it, you will lose out the ability to
1:12
log in to your Google account and restore the device from my backup, which can still
1:19
be done later on after the setup is complete. All you need to do is go into the Settings and from there, Connect to Wi-Fi and connect
1:25
to your account. Then on the next page, we'll have the Time and Date
1:31
Now this will not be seen if you have connected to Wi-Fi
1:35
This is only if you chose to skip connecting to Wi-Fi, so here you will have to set up
1:39
date and time manually. So I could go and select it myself
1:45
It actually is correct for the most part, assuming I changed the time zone
1:52
So let's go to Next. Then we have Google Services. So briefly going over them, Use Location allows the device to use GPS tracking for apps, for
2:02
instance, like Google Maps, so they give you an accurate route to your destination
2:05
It is also being used by apps that shouldn't have any business in it, like, for instance
2:10
Xiaomi Smart Apps, Smart Home, precisely, which, for instance, their thermometer needs
2:15
to know where you are for some unknown reason. So again, you can turn it off here
2:21
So when you turn it off, the Location, it disables also Scanning
2:25
Scanning basically allows the device to scan for nearby devices, things like Wi-Fi, Bluetooth
2:29
devices, so it sees them. Then below that, we have Send User and Diagnostic Data
2:34
So this basically gathers data on how you use the device and sends it to Google. Again, if you don't want it, disable it
2:41
Scroll down, Accept, and this will take us to the next page where we can protect our device
2:45
So it looks like it automatically opts into a fingerprint. So if you tap Next, it will prompt you to set up a PIN pattern or password because you
2:54
cannot have just a fingerprint. Also meaning if something happens with it, you will basically lose access to your device
3:00
So that's why there's other means of unlocking your device. So from here, you can select, for instance, something like Pattern
3:06
It gives you Secure Startup option. Personally, I would tell you to not use it
3:11
Now what it does is basically when your device is turned off and you are turning it on, before
3:18
it actually boots into Android, it will go into this lock screen, which you will need
3:22
to put in your PIN, pattern, password, at which point it will then finish up booting up
3:28
So once it boots up, you will be back in the lock screen of Android, which you will have
3:32
to confirm your pattern, PIN, password once more to actually gain access to the device
3:38
So basically, it requires you to put in your password, passcode twice in a row for literally
3:42
no reason. So I'm going to select No. From here, we can input our protection
3:49
So I chose Pattern. That's what I'm going to draw, a pattern. I'm going to tap Next, repeat the same pattern, confirm it, and that will set it up
3:57
Now it tells me to scan my finger on the fingerprint sensor, which is somewhere right here, but
4:02
I'm going to just skip it because I just want it to have a pattern and not really a fingerprint
4:08
So I'm going to skip anyway. Wireless updates. So let's just agree to these
4:14
You do have to. And then Accept and Continue. That was loud
4:20
And once you do, you can see we are now in the home screen
4:25
And that is basically how you go through the setup of this phone. And if you found this very helpful, don't forget to hit Like, Subscribe, and thanks
