0:00
Welcome, Infonom is a Sharp Aquis S2 and today I will show you how to enable power saving mode
0:12
So to start off we will want to open up the settings app. The quickest way will be just
0:16
to pull down the notification panel and it's this little gear icon right here. Tap on it
0:23
and we'll go straight to the settings and from here scroll all the way down
0:27
till you see the battery section. So tap on it and from here you have two different power saving
0:32
modes. The one that is actually called power saving mode and limit power saving and we'll
0:38
start off with the standard one. So once you enable it, it will remove GPS LAN and network
0:45
and hotspots. Bluetooth will be disabled. Also your brightness will be lowered and the screen
0:50
on time. So instead of for instance like a minute it will be shorter so the screen will turn off
0:57
more frequently. Now I'm going to disable it for now and now going back to the other one
1:04
the limit power saving. This will basically make this device into a black and white
1:11
only phone and SMS receiving device. Everything else will be disabled as you can see
1:16
It turns off mobile network, LAN, GPS, Bluetooth and mobile hotspots and other functions. Disables
1:23
most applications except telephones, SMS and so on. It doesn't really specify what so on is but
1:30
you can gather that basically you will get a phone looking like so. So if I tap on it
1:36
I get phone, messages, camera and gallery. Let's see if camera actually works. So apparently camera works
1:44
So that's basically all you get. There's nothing else to it and if you want to exit this mode you
1:49
can just tap on the little exit right here and tap on it to confirm it and we're back into the normal
1:56
But this mode is more of an extreme one if you're like really struggling with the battery and enable
2:01
it. So that is basically the two ways you can enable power saving mode and if you found this
2:06
video helpful don't forget to hit like, subscribe and thanks for watching
