0:00
Welcome! In front of me I have a Redmi Smartband 2 and I'm gonna show you how to charge the battery
0:06
on this smartband. Before we start if you want to charge the battery on this smartband you will need a couple of
0:17
things. You will need a charging cable that was provided with your smartband. Looks like this
0:21
We have the USB end and the charging end, the one with the pins. You will also need some kind
0:29
of power source you can use to charge the device. It can be anything that provides power through the
0:34
USB plug. So I'm gonna use this power brick that has USB plug on it but you can use a computer
0:42
anything that provides the power through the USB. I'm just gonna mention it but I'm gonna use the
0:50
extension cable because the charging cable is too short to reach the power outlet. So
0:54
I'm gonna plug the extension cable to the power brick like this. Then I'm gonna plug the brick to the power outlet. Then I'm gonna plug the
1:10
charging cable for our smartband to the power source to the USB power
1:18
USB plug with the power. And then we can pick up the band and plug the charging of the
1:28
end with the pins to the band. And it's quite easy. You can just bring it close to the band
1:32
and it's gonna snap on because the cable is magnetic. So once it snaps on the band should
1:39
start charging. And it was charging for a second there. Let me replug it. And as you can see
1:47
it started charging like this. The cable is not seated properly so it doesn't work
1:57
Let me give me a second. Okay now it should be fine. Okay and that's how it looks like. That's
2:05
how it charges. And you can leave it to charge for a couple, I would say hour or two and should
2:12
be fully charged. And once you're done charging you can unplug the cable like this. And that's
2:19
how you charge the battery on this smartband. Thank you for watching. If you found this video
2:24
helpful please consider subscribing to our channel and leaving the like on the video
